Activated Carbon is produced from any carbonaceous material like Eucalyptus,
Saw Dust, Rice Husk, Coal, Wood, Lignite and Coconut Shell, etc. But, OUR
GRANULAR ACTIVATED CARBON IS MANUFACTURED FROM COCONUT SHELL ONLY. So, it is
hard compared with other carbon & has a higher surface area. COCONUT
SHELL based granular activated carbon gives more adsorption capacity due to
its micro porous structure and superior hardness
4 x 8, 8 x 16, 16 x 32 US mesh size
450 to 1100 iv
9 to 10
Total Surface Area
400 to 1000 m2/gm
0.55 +/- 0.05 gm/cc
Application Of Granular Activated Carbon
Effluent Treatment Plant
Waste Water Treatment for Reduction in the level of BOD & COD
Catalyst in Chemical-Metallurgical Industries & Petroleum
Swimming Pools & Soft Drink Plant For De-Chlorination
Molecular weight flocullant polymers Available in Anionic, Non Ionic and
High molecular weight flocullants are
capable of promoting flocullation by neutralizing the superficial electric
charges of sludge particles in the water and unstabilizing each individual
particles. The particles then are absorbed by the activated functional group
in the flocullant polymer.
Superior floc formation
Major effects yielded with limited use
Superior cleaning performance
Use over a broad pH range
Combined use with inorganic flocullants heightens superior
Industrial Waste Water Treatment
- Primary Clarification
- Secondary & Tertiary Treatment
- Sludge thickening
- Sludge dewatering
- Color removal
- Dissolved air floatation
Activated Alumina is an aluminium oxide
that is highly porous and exhibits tremendous surface area. Activated
Alumina is resistant to thermal stock and abrasion and will not shrink,
swell, soften nor disintegrate when immersed in water.
Purification of water (removal of metallic traces, BF3, TBC, HCl,
HF and fluorinated hydrocarbons)
Drying of air and gases such as steam cracked gases, catalytic
reforming recycle gas, synthetic gas, natural gas, CO2
A colorless, mobile, hygroscopic liquid with
characteristic amine-like odor.
Clear and substantially free of foreign matter
Morpholine, wt. %
Specific gravity, 20/20?C
1.001 min., 1.004 max.
Water, wt. %
Normal boiling point, ?C
Flash point, TCC, ?F
Freezing point, ?C
Weight, lb/gal, 20?C
Boiling range, ?C, IBP
A corrosion inhibitor, especially in
steam boiler systems; an emulsifier for cosmetics, rubless waxes, and
polishes; a separating agent for volatile amines; an intermediate in the
manufacture of optical brighteners; an intermediate for textile lubricants,
softening agents, adjuvants, whitening agents, sizing emulsifiers, rubber
vulcanization accelerators, antioxidants, surface-active agents,
plasticizers, viscosity improvers, insecticides, fumigants, herbicides,
dyes, catalysts, bactericides, analgesics, anesthetics, and other
physiologically active agents.
ACUROX DI-3 is an environmentally safe and versatile antimicrobial and a powerful disinfectant. When ACUROX DI-3 is dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All the degradation products are non toxic.
No hazardous by-products .More effective than chlorine, chlorine dioxide, quarternary compounds or iodine compounds for sanitizing human contact surfaces .Effective and stable at pH Values 1-10 . Non foaming and exhibits low surface tension .No rinse required at levels upto 100 ppm for food items and upto 500ppm .for equipment or tank sanitation use. Does not contribute to TDS .Not persistent in the environment .Does not corrode metallic surfaces
Water tank surface cleaning and fumigation
Meat, poultry, and vegetable processing plants (with direct food contact)
Disinfection of potable water (Normal dosage 1 ml per 12.5 ltr water)
Hatcheries and egg processing plants (Normal dosage is 80 ppm with contact time of 1 minute for 99.999% microbial kill)
Milk and dairy product plants
Hospital and health care facilities, veterinary clinics
Wastewater treatment (odor control agent, disinfectant and cleaner)
Cyclohexylamine is colorless to pale yellow clear liquid, no visible impurities. It has strange odor. It is a strong organic caustic liquid, It can form azeotrpe with water at 96.40°C, miscible with a lot of organic solvents.
Cyclohexylamine is the raw material for producing desulfurization agent, boiler corrosion inhibitors, boiler water treatment, vulcanization accelerator, emulsifier, antistatic agent, latex coagulant, oil product additives, corrosion resistance agents, fungicides, pesticides and so on. Synonym(s): Aminocyclohexane; Aminohexahydrobenzene; Aniline Hexahydro; CHA; Hexahydrobenzenamine IMIS: 0842 CAS: 108-91-8
On undergoing phase change from solid to liquid, our ecological thermal energy storage material absorbs a certain amount of heat, known as latent heat, at a relatively constant temperature. When this phase change process is reversed, that is from liquid to solid, the previously stored latent heat is released, again at a nearly constant temperature.
A new generation of ecological heat storage materials utilising the processes of phase change between solid and liquid (melting and congealing) to store and release large quantities of thermal energy at nearly constant temperature. the phase change materials (pcm’s) provide a very effective means for storing heat and cold, even when limited volumes and low operating temperature differences are applicable.
Cationic-Polymer, a cationic polyelectrolyte coagulant/ flocculant, exhibits to be used for the purpose of dewatering of organic sludge from sewage, human waste etc. It proves to be useful in dewatering of sludge from industrial effluent. The key benefit of using Cationic Polymer is that it is economical to use effectively at very low dosage level and also performs well over a wide pH range. It can achieve high solids capture and is easily sealable in water.